Pilz PNOZ s3 Series User Manual

...
Sachnummer Printed in Germany
© Pilz GmbH & Co. KG, 2011
+49 711 3409-444
support@pilz.com
Pilz GmbH & Co. KG
Felix-Wankel-Straße 2
73760 Ostfildern, Germany
Telephone: +49 711 3409-0
Telefax: +49 711 3409-133
E-Mail: pilz.gmbh@pilz.de
Internet: www.pilz.com
Technical support
In many countries we are
represented by our subsidiaries
and sales partners.
Please refer to our homepage
for further details or contact our
headquarters.
InduraNET p
®
, Pilz
®
, PIT
®
, PMCprotego
®
, PMI
®
, PNOZ
®
, Primo
®
, PSEN
®
, PSS
®
, PVIS
®
, SafetyBUS p
®
, SafetyEYE
®
, SafetyNET p
®
, the spirit of safety
®
are registered and protected trademarks
of Pilz GmbH & Co. KG in some countries. We would point out that product features may vary from the details stated in this document, depending on the status at the time of publication and the scope
of the equipment. We accept no responsibility for the validity, accuracy and entirety of the text and graphics presented in this information. Please contact our Technical Support if you have any questions.
21395-EN-10, 2013-05 Printed in Germany © Pilz GmbH & Co. KG, 2011
Back cover

Pilz PNOZ s3 Series Specifications

General

Type	Safety Relay
Supply Voltage	24 V DC
Auxiliary Contacts	1 N/C
Width	22.5 mm
Mounting	DIN Rail
PL	e
Category	4
SILCL	3
Rated Current	6 A
Contact Material	AgSnO2
Protection Class	IP20
Stop Category	0
Standards	EN ISO 13849-1
Rated Voltage	24 V DC
Operating Temperature	-10 to 55 °C