Need help?Do you have a question about the Pilz PZA Series and is the answer not in the manual?
General| Series | PZA |
|---|---|
| Protection Class | IP20 |
| Rated Voltage | 24V DC, 24V AC, 230V AC |
| Mechanical Life | 10, 000, 000 operations |
| Electrical Life | 100, 000 operations |
| Operating Temperature | +55°C |
| Mounting Type | DIN Rail |
Describes the unit's intended operation as a time delay device in safety circuits.
Requires a safety assessment in accordance with the Machinery Directive before device use.
Functional safety of the plant/machine depends on defined safety requirements and implementation.
Products must be assembled, installed, programmed, commissioned, operated by competent persons.
Notes for overvoltage category III: connected components must have rated insulation voltage of at least 250 V.
Comply with safety characteristic data for required safety level; SIL/PL values are not identical to unit values.
To Next Page
