Need help?Do you have a question about the Pilz PZE X4.1P and is the answer not in the manual?
General| Product type | Safety Relay |
|---|---|
| Type | PZE X4.1P |
| Supply voltage | 24 V DC |
| Rated voltage | 24 V DC |
| Number of safety contacts | 4 |
| Number of auxiliary contacts | 1 |
| Number of test outputs | 0 |
| Max. switching current | 6 A |
| Terminal type | Screw terminals |
| Stop category | 0 |
| Protection class | IP20 |
| Width | 45 mm |
| Safety contact type | NO (Normally Open) |
| Response Time | 20 ms |
| Operating Temperature | -10 °C to +55 °C |
| Operating temperature range | -10 °C to +55 °C |
| Auxiliary contact type | NC (Normally Closed) |
Guides on manual usage and explains critical warning symbols.
Covers the product's intended applications and essential safety regulations.
Details safety assessment needs and EMC-compliant electrical installation guidelines.
Defines requirements for qualified personnel and outlines warranty conditions.
Provides guidance on product disposal and key safety precautions for operation.
Lists unit features like relay outputs, LED indicators, and safety functions.
Shows the terminal configuration and wiring for the DC version.
Displays the terminal configuration and wiring for the AC/DC version.
Explains product operation, procedures, and LED status interpretation.
Provides instructions for unit installation and wiring best practices.
Details connections for supply voltage, input circuits, and feedback loops.
Describes operational procedures, safety checks, and LED status interpretation.
Lists faults preventing startup and checks for interference.
Provides physical dimensions and general electrical/input specifications.
Details safety contacts, utilization categories, and fuse protection.
Lists timing specifications and thermal current ratings.
Covers environmental suitability, protection types, and mechanical data.
Presents electrical, input, and relay output specifications for AC/DC models.
Details utilization categories and thermal current for AC/DC models.
Lists timing, environmental, and vibration specifications for AC/DC models.
Covers environmental, protection, and mechanical data for AC/DC models.
Emphasizes compliance, explains safety data interpretation, and recommends software tools.
Advises considering service life graphs for relay output validity.
Illustrates service life based on switching current for 24 VDC and 230 VAC.
Shows service life graphs for 110 VDC operating conditions.
Provides a procedure for safely removing plug-in terminals.
Lists product types, features, connection types, and order numbers.
States compliance with the machinery directive and where to find the declaration.
Lists contact information for technical support across various regions.
To Next Page
