Need help?Do you have a question about the Pilz PZE 9 and is the answer not in the manual?
General| Supply voltage | 24 V DC |
|---|---|
| Safety inputs | 2 |
| Number of safety contacts | 2 |
| Number of auxiliary contacts | 1 |
| Category | 4 |
| PL | e |
| SILCL | 3 |
| Stop Category | 0 |
| Width | 22.5 mm |
| Rated current | 6 A |
| Protection class | IP20 |
| Mounting type | DIN rail |
| Switching capacity | 6 A / 250 V AC |
| Operating temperature range | -10 - 55 °C |
Defines the product's specific applications and limitations.
Outlines compliance with relevant safety directives and standards.
Emphasizes the need for a safety assessment before unit use.
Specifies requirements for personnel involved in product assembly and operation.
Describes the safety functions and requirements the unit meets.
Explains the operational procedures and LED indicators of the unit.
Provides essential guidelines and precautions for connecting the unit.
Describes potential faults and how to check unit functionality.
Details specifications for the unit's safety and auxiliary relay contacts.
To Next Page
