Need help?Do you have a question about the Pilz PNOZ 2 and is the answer not in the manual?
Defines intended applications, safety regulations, and assessment requirements.
Describes the internal redundancy and self-monitoring safety mechanisms.
Explains the safety-oriented interruption of a safety circuit and operational states.
Describes testing procedures for safety contacts and operational checks.
Provides detailed electrical specifications like voltage, current, and power.
Details the specifications of relay outputs, including safety and auxiliary contacts.
Provides electrical specifications for models 775830 and 775850.
Lists delay and recovery times for models 775830 and 775850.
Covers mounting, material, conductor cross-sections, and dimensions for specific models.
Details conductor cross-sections, torque, dimensions, and weight for specific models.
Presents safety characteristic data (PL, SIL CL, PFH) according to relevant standards.
General| Product type | Safety relay |
|---|---|
| Rated current | 6 A |
| Supply voltage | 24 V DC |
| Stop category | 0 |
| Contact configuration | 1 N/O, 1 N/C |
| Rated voltage | 24 V DC |
| Safety category | Category 4 |
| Standards | EN 60204-1 |
| Weight | 200 g |
To Next Page
