PZE X4.1P
Operating Manual PZE X4.1P
1003203-EN-09
| 22
Example
} Inductive load: 0.2 A
} Utilisation category: AC15
} Contact service life: 1 000 000 cycles
Provided the application to be implemented requires fewer than 1 000 000 cycles, the PFH
value (see Technical details [ 12]) can be used in the calculation.
To increase the service life, sufficient spark suppression must be provided on all relay con-
tacts. With capacitive loads, any power surges that occur must be noted. With DC contact-
ors, use flywheel diodes for spark suppression.
Remove plug-in terminals
Procedure: Insert the screwdriver into the housing recess behind the terminal and lever the
terminal out.
Do not remove the terminals by pulling the cables!
Order reference
Product
type
Features Connection type Order no.
PZE X4.1P 24 V DC Screw terminals, plug-in 777587
PZE X4.1P C 24 V DC Spring-loaded terminals, plug-in 787587
PZE X4.1P 24-240 V AC/DC Screw terminals, plug-in 777588
PZE X4.1P C 24-240 V AC/DC Spring-loaded terminals, plug-in 787588
To Next Page
Loading...
