Black plate (172,1)
p If the selected language is not available, the
language specified on the disc is applied.
p You can switch the audio language by
touching the audio language switching key
during playback.
p The setting made here will not be affected
even if the audio language is switched dur-
ing playback using the audio language
switching key.
Setting the menu language
You can set the preferred language in which
the menus recorded on a disc are displayed.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The “Video Setup” screen appears.
3 Touch [DVD/DivX Setup].
The following screen appears.
4 Touch [Menu Language].
The pop-up menu appears.
5 Touch the desired language.
When you select “Others”, a language code
input screen is shown. Input the four-digit
code of the desired language then touch
.
= For details, refer to Language code chart for
DVDs on page 177.
The menu language is set.
p If the selected language is not available, the
language specified on the disc is dis-
played.
Setting the angle icon display
You can set whether to display the angle icon
on the scenes where the angle can be
switched.
p This setting is available only when “Disc” is
selected as the source.
1 Press the HOME button to display the
Top menu screen.
2 Touch the following keys in the follow-
ing order.
The “Video Setup” screen appears.
3 Touch [DVD/DivX Setup].
The following screen appears.
4 Touch [Multi Angle] repeatedly until
the desired setting appears.
! On (default):
Turns the multi-angle setting on.
! Off:
Turns the multi-angle setting off.
<CRB4523-A>172
Engb
172
Chapter
28
Setting up the video player
To Next Page
Loading...
