Why does my Pioneer CDJ-1000 CD Player make loud noise with some discs?
If your Pioneer CD Player produces loud noise or stops playing with certain discs, it could be due to: * A bad scratch or warp on the disc. If so, replace the disc. * An extremely dirty disc. In that case, clean the disc.
Why is my Pioneer CDJ-1000 CD Player jog dial not working?
If the Jog dial on your Pioneer CD Player isn't working correctly, check these: * Ensure the Digital Mode switch is set to the [OFF] position. * Verify that the correct JOG MODE [VINYL/CDJ] is selected by pressing the JOG MODE SELECT button.
What to do if my Pioneer CDJ-1000 CD Player disc won't eject?
If the disc in your Pioneer CD Player won't eject, try the following: * Make sure the power plug is properly connected to the wall outlet. * Check the EJECT UNLOCK/LOCK button and ensure it is set to the [UNLOCK] position before pressing the EJECT button (0).
How to fix distorted sound on Pioneer CD Player?
If the sound from your Pioneer CD Player is distorted or noisy, consider these solutions: * Ensure you're connected to the audio mixer's LINE INPUT terminals, not MIC terminals. * Clean any dirt from the pin plugs and amplifier terminals. * Try switching off any nearby TV sets, moving the player away from the TV, or plugging the player into a separate outlet to avoid interference.
What to do if the disc is not rotating when power is ON on Pioneer CDJ-1000?
The disc rotation stops automatically if no operation has been performed for 80 minutes or more in pause mode. Playback can be started by pressing the PLAY/PAUSE button (6). Press the EJECT button (0) to eject the disc. Also, when the last track on the disc is over the disc stops rotating. Playback can be started by pressing the PLAY/PAUSE button (6). Press the EJECT button (0) to eject the disc.
Why does my Pioneer CDJ-1000 produce loud noise with some discs?
The disc may have a significant scratch or warp, in which case you should replace it. Alternatively, the disc might be extremely dirty, so try cleaning it.
Why do DJ functions not work on my Pioneer CDJ-1000 CD Player?
The Digital Mode switch may be set to the [ON] position. Set the Digital Mode switch to the [OFF] position.
Why won't my Pioneer CD Player start playing the disc?
The auto cue function might be enabled. To disable it, hold down the TIME MODE/AUTO CUE button for 1 second or longer to turn off the A. CUE function.
Why is the disc not rotating in my Pioneer CD Player?
If the disc in your Pioneer CD Player isn't rotating, it could be due to the following reasons: * The disc rotation stops automatically if no operation has been performed for 80 minutes or more in pause mode. Playback can be restarted by pressing the PLAY/PAUSE button (6). You can also eject the disc by pressing the EJECT button (0). * When the last track on the disc is over the disc stops rotating. Playback can be restarted by pressing the PLAY/PAUSE button (6). You can also eject the disc by pressing the EJECT button (0).
Why are the DJ functions not working on my Pioneer CDJ-1000 CD Player?
If the DJ functions on your Pioneer CD Player aren't working, it might be because the Digital Mode switch is set to the [ON] position. Set the Digital Mode switch to the [OFF] position.
Power| power requirements | AC 120 V, 60 Hz |
|---|---|
| power consumption | 33 W |
Operating Environment| operating temperature range | +5˚C – +35˚C |
|---|---|
| operating humidity range | 5% – 85% |
Audio Specifications| frequency response | 4 Hz – 20 kHz |
|---|---|
| signal-to-noise ratio | 115 dB or more |
| distortion | 0.006% |
Weight and Dimensions| weight | 4.2 kg |
|---|---|
| width | 320 mm |
| depth | 370 mm |
| height | 105 mm |
To Next Page
