To Next PageTo Next PageWhy isn't track search working with auto cue on Pioneer CDJ-800MK2 CD Player?
If the auto cue function is on and track search isn't completing on your Pioneer CD Player, it could be because the muted sections between tracks are too long, or the cue point can't be found within ten seconds. Turn off the auto cue function by pressing the TIME MODE/AUTO CUE button for more than one second.
Why is the sound distorted on my Pioneer CD Player?
If the sound from your Pioneer CD Player is distorted or noisy: * Ensure that the output cables are connected to the audio mixer's LINE INPUT terminals and not the MIC terminals. * Clean any dirt from the pin plugs and terminals. * Try switching off any nearby TV sets or moving the CD player away from them to eliminate interference.
What to do if Pioneer CDJ-800MK2 CD Player playback immediately stops?
If playback stops immediately after starting on your Pioneer CD Player: * Ensure the disc is loaded correctly with the label side up. * Clean any smudges from the disc.
What to do if Pioneer CDJ-800MK2 CD Player produces loud noise with certain discs?
If your Pioneer CD Player produces loud noise or stops playing with certain discs: * Replace the disc if it has a bad scratch or warp. * Clean the disc if it is extremely dirty.
Why won't my Pioneer CDJ-800MK2 CD Player play when a disc is inserted?
If play doesn’t start on your Pioneer CD Player even when the disc is inserted, the auto cue function might be enabled. Hold down the TIME MODE/AUTO CUE button for 1 second or longer to turn off the auto cue function.
Why track search is not finished when auto cue function is on Pioneer CD Player?
If track search is not finished when the auto cue function is ON in your Pioneer CD Player, press the TIME MODE/AUTO CUE button for more than 1 second to set the auto cue function OFF. This is because if the sound muted portion between selections is long, searching time will be long.
General