Pioneer DDJ-WeGO2 Operation Guide

VirtualDJ 8 – Pioneer DDJ-WeGO2
6
Hold SHIFT down and then use this knob to adjust the intensity of the blue color of
the DDJ-WeGO2 jogwheel.
6. EQ HI: Adjusts the high (treble) frequencies of the left or right assigned deck.
Hold SHIFT down and then use this knob to adjust the intensity of the red color of
the DDJ-WeGO2 jogwheel.
7. LOAD: Load the selected track from BROWSER to the left or right assigned
VirtualDJ deck.
8. BROWSE Knob/push:
Use this knob to scroll through files. Push the knob to toggle between the normal
Decks view and the Browser Zoom panel of the VirtualDJ WeGO2 GUI.
Note: The Browser Zoom panel is not available in the default GUI of VirtualDJ, therefore the
push action will have no affect if this skin is selected)
Hold SHIFT down and then use this knob to scroll through the folders. While
SHIFT is pressed, push the knob to open/close sub-folders.
B. Decks
9. PLAY: Plays-Pauses the track. If
SHIFT is pressed it plays the track in
Stutter.
10. CUE: If the track is playing, pauses
and goes to the last cue point. If the
track is paused, sets the current
position as cue point, and previews
the cue as long as the button is
pressed. If SHIFT is pressed, it jumps
to the beginning of the track.
11. JOG: Touch sensitive platter for
scratch, bend, seek or Effect
parameter control.
Use the touch (top) area of the Jog to
scratch the track and the outer part
to bend (temporary speed up/down).
The Jog can operate also only in
Bend mode if the VINYL mode is
disabled from the VirtualDJ GUI.
Hold SHIFT down and then use the
Jog to fast search through the track.
Deck Controls
The Jog can also control the Filter, Key and the Effect parameters of the triggered
Effects. See 15, 16, 17, 18 and 19.

Pioneer DDJ-WeGO2 Specifications

General

Brand	Pioneer
Model	DDJ-WeGO2
Category	DJ Equipment
Language	English