Why can’t MIDI sequencer be synchronized with my Pioneer Music Mixer?
If a MIDI sequencer can’t be synchronized with your Pioneer Music Mixer: * Ensure the MIDI sequencer’s sync mode is set to “slave”. * Note that MIDI sequencers that do not support MIDI timing clock cannot be synchronized.
General| Channels | 4 |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion (THD) | 0.005% |
| Sampling Rate | 96 kHz |
| A/D, D/A Converter | 24-bit |
| Dimensions | 320 mm |
| EQ | 3-band EQ |
| Effects | Built-in effects |
| Crossfader | Replaceable |
Numbered instructions for safe use and maintenance of the apparatus.
Covers electrical shock, fire hazards, ventilation, power cord safety, and environmental considerations.
Overview of the unit's audio quality, filter, beat effects, digital out, and MIDI capabilities.
Detailed description and function of each connector on the unit's rear panel.
Setting input sources and adjusting levels for basic mixing.
Operating channel faders and cross fader for volume and sound mixing.
Using microphone inputs and headphone monitoring features.
Using faders to control CD player playback and cueing.
Controlling CD player playback using the cross fader.
Setting BPM via AUTO or TAP for synchronized beat effects.
Choosing effects, channels, and beat multiples for desired output.
Using TIME and LEVEL/DEPTH dials to control effect parameters.
Table addressing issues like no power, no sound, distorted audio, and MIDI synchronization problems.
Technical details on power, dimensions, sampling rate, frequency response, and S/N ratio.
Visual representation of the mixer's internal signal flow and component connections.
To Next Page
