Pioneer PDP-4270HD - CBL;SAT Control Buttons

88
En
Useful Remote Control Features
13
CBL/SAT control buttons
When the Mode switch is set to CBL/SAT, the cable converter
or satellite broadcast tuner connected to the display can be
operated using the buttons shown below (3, 4, 5, 8 and 9 for
cable converters and 1 to 7 for satellite tuners):
1SAT MENU
Displays the satellite broadcasting menu screen.
2ENTER, ///
ENTER: Activates the selected function.
///: Selects items on the SAT GUIDE screen or
SAT MENU screen.
3 0 – 9
Press a button (or buttons) that corresponds to the
channel that you want to watch.
4CH +/–
Selects a higher or lower channel.
5 SOURCE 
Turns the equipment power on and off.
6 SAT GUIDE
Displays the satellite broadcasting guide screen.
7RETURN
When the CBL/SAT menu is displayed, restores the
immediately previous screen.
8CH ENTER*
Enters the selected channel with the direct channel
selection buttons.
9 CH RETURN*
Switches between the current channel and the channel
you were watching immediately before.
* Some cable converter manufacturers do not preset CH
ENTER and CH RETURN.
NOTE
• CABLE and SAT cannot be selected at the same time.
4
8
7
6
3
5
2
1
9
Mode switch
(with “CBL/SAT”
selected)
PDP6070HD.book Page 88 Friday, May 19, 2006 5:01 PM