EasyManuals Logo

Pioneer PDP-435FDE User Manual

Pioneer PDP-435FDE
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
English
9
En
Be sure to use four or more mounting holes symmetrical to the vertical and horizontal median lines.
Use M8 screws, which go 12 to 18 mm in depth from the mounting surface of the Plasma Display. See the side
view above.
Be careful not to block the ventilation opening at the rear of the Plasma Display.
Be sure to install the Plasma Display on a flat surface because it contains glass.
The screw holes other than the above are to be used only for the specified products. Never use them for mount-
ing non-specified products.
Do not mount or remove the Plasma Display to or from the stand, with speakers attached.
It is strongly recommended to use the optional PIONEER mounting products.
PIONEER shall not be liable for any personal injury or product damage that results from the use of mounting items other than
the optional PIONEER products.
Installation Precautions
Observe the following precautions when installing with any items such as the optional stand.
When using the optional stand, brackets, or equivalent items
Ask your dealer to perform the installation.
Be sure to use the supplied bolts.
For details, see the instruction manual that comes with the optional stand (or equivalent items).
When using other items
Consult your dealer.
The following six mounting holes can be used for the installation:
Median line
Rear view
Median line
Side view
Plasma
Display
Mounting surface
12 to 18 mm
M8 screw
Mounting
bracket (or
equivalent item)
Mounting holeMounting hole
02Safety Precautions

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pioneer PDP-435FDE and is the answer not in the manual?

Pioneer PDP-435FDE Specifications

General IconGeneral
Depth93 mm
Width1120 mm
Weight26800 g
Tuner typeAnalog
Pixel pitch- mm
Aspect ratio-
Product colorAluminium, Black
LED indicatorsY, Power
Noise reductionYes
RMS rated power26 W
AC input voltage220 - 240 V
Display diagonal43 \
Channels quantity99 channels
AC input frequency50 - 60 Hz
Built-in subwooferNo
Display brightness- cd/m²
Display resolution1024 x 768 pixels
Display technologyPlasma
Number of speakers2
Teletext standardsTop-text
Placement supportedHorizontal
SCART ports quantity3
USB 2.0 ports quantity0
Contrast ratio (typical)1200:1
Annual energy consumption- kWh
Screen format adjustments4:3, 14:9, 16:9, Zoom
Analog signal format systemNTSC, NTSC 3.58, NTSC 4.43, PAL, PAL 60, PAL BG, PAL DK, PAL I, SECAM, SECAM B/G, SECAM D/K, SECAM L
Power consumption (standby)0.4 W
Power consumption (typical)295 W
Sound enhancement technologyFOCUS, SRS, TruBass
On Screen Display (OSD) languagesDEU, DUT, ENG, ESP, FIN, FRE, GRE, POR, RUS, TUR

Related product manuals