Preparation05
14
En
Chapter 5
Preparation
Installing the plasma television
Location
• Avoid direct sunlight. Maintain adequate ventilation.
Caution
• If you do not leave sufficient space above the plasma television,
it will not receive enough ventilation and will not operate
properly.
• Pioneer will not be responsible for accident or damage caused
by inadequate installation or stabilization, erroneous operation,
remodeling or natural disasters.
Note
• Allow enough space around the upper and back parts when
installing to ensure adequate ventilation of the rear of the unit.
• Be sure to install the plasma television in a flat, stable location.
Using the optional Pioneer stand
(for PDP-5080XA only)
For details on installation, refer to the instruction manual supplied
with the stand.
Using the optional Pioneer speakers
(for PDP-5080XA only)
For details on installation, refer to the instruction manual supplied
with the speakers.
Moving the plasma television
When installing on a rack, etc., hold the plasma television as shown
below. Because the plasma television is heavy, be sure to have
someone help you when moving it.
(for PDP-5080XA)
Note
• Do not use the speaker to support the weight of the plasma
television.
• Always remove the speakers before moving the plasma
television. Do not hold the plasma television by the speaker
mounting fittings.
(for PDP-4280XA)
Over 50 cm
Over
10 cm
To Next Page
Loading...
