Pioneer PDP-5080XA - Remote Control Unit Layout

Part names 04
13
En
English
Remote control unit
Point the remote control at the plasma television to operate.
1 
Turns on the power to the plasma television or places it into the
standby mode.
2 INPUT
Selects an input source of the plasma television. (“INPUT 1”,
“INPUT 2”, “INPUT 3”, “INPUT 4”, “INPUT 5”)
3 PC
Selects the PC terminal as an input source.
4 0 to 9
TV/External input mode: Selects a channel.
Teletext mode: Selects a page.
Turns the power on when the STANDBY indicator lights red.
5 p y
Displays the channel information.
6 P+/P–
TV/External input mode: Selects a channel.
w/x
Teletext mode: Selects a page.
7 g
Sets the sound multiplex mode.
8 RETURN
Restores the previous menu screen.
9 ///
Selects a desired item on the setting screen.
ENTER
Executes a command.
10 Colour (RED/GREEN/YELLOW/BLUE)
Teletext mode: Selects a page.
11
Jumps to Teletext subtitle page.
12 k
Displays hidden characters.
13 f
Selects the screen size.
14 d
TV/External input mode: Freezes a frame from a moving image.
Press again to cancel the function.
Teletext mode: Stops updating Teletext pages. Press again to
release the hold mode.
15 HDMI CONTROL
Displays the HDMI Control menu.
16 i +/i –
Sets the volume.
17 e
Mutes the sound.
18 HOME MENU
Displays the HOME MENU screen.
19 m
Selects the Teletext mode (all TV image, all TEXT image, TV/
TEXT image).
20 l
Displays an Index page for the CEEFAX/FLOF format. Displays
a TOP Over View page for the TOP format.
1
2
4
5
7
8
9
10
11
12
13
15
14
16
17
18
19
20
6
3