Pioneer PDP-R04G - Page 169

PDP-R04E
118
1234
1234
C
D
F
A
B
E
1
123456789
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
F U N C T
F A N : M I N< = >
I O N KC H E C V D 1 – 1 3 1 – N T V – J H S
No. Display
Detail Remarks
1 IC1 TEST
For CMX
2 IC2 TEST
For CMX
3 IC3 TEST
For CMX
4 IC4 TEST
For CMX
5 FAN <=>
: MINI ⇔ CONT ⇔ MAX
6 AFT <=>
UNLOCKED ⇔ LOCKED For Factory use
7 BSD ANT VOLT <=>
15V ⇔ 11V ⇔ 0 Only domestic model
8 AUTO PRESET CHECK <=>
NO ⇔ YES
Only Europe HD and for
Factory use
232C Command
*1
ALN/ALY
BVH/BVM/BVL
None
Select No. Display Function Remarks
1 (Default) NO Performing this function when shifting from
"NO" to "YES".
7 YES Perform AUTO PRESET function to specific frequency
to reduce AUTO RESET time at production line.
2 FUNCTION CHECK
No last memory in this menu
2.1 FAN
Controls FAN speed by force. (MIN : STOP, CNT : Low Speed, MAX : High)
Temp sensor is working only displaying data value in service factory mode.
After getting off service factory mode, this function is set to normal automatically.
2.2 AFT LOCK
For production line use only
Stop AFT tuner received function and receive a center frequency.
After turning off a unit (including stand-by mode), this setting is set normal (AFT function) automatically.
It's performed to two tuner and DTV tuner to U.S. model.
2.3 AUTO PRESET CHECK
For production line use only