2
1
23
4
1234
C
D
F
A
B
E
PDP-R04G
Part No.
Ref. No. Mark Symbol and Description PDP-R04E PDP-R04G Remarks
/WYVI6 /TLDFR
PCB ASSEMBLIES
P9- 1 MR MAIN BOARD ASSY AWV2041 AWV2044
NSP MR FUKUGOU BOARD ASSY AWV2040 AWV2047
P9- 5 FRONT ASSY AWZ6832 AWZ6815
NSP MR AV BOARD ASSY AWV2039 AWV2043
P9- 2 AV BOARD ASSY AWZ6813 AWZ6818
P9- 7 REG ASSY AWZ6814 AWZ6833
P9- 8 POWER SUPPLY Unit AXY1065 AXY1081
P9- 9 PC Card Module AXY1073 Not used
PACKING SECTION
P7- 1 Operating Instructions (English/French/German) ARE1368 Not used
Operating Instructions Not used ARE1369
(English/Chinese/Spanish/Portguese)
P7- 2 Operating Instructions (Italian/Dutch/Swedish/Spanish) ARC1520 Not used
P7- 3 Operating Instructions about HDMI ARE1375 Not used
(English/French/German/Italian/Dutch/Swedish/Spanish)
P7- 4 Remote Control Unit AXD1481 AXD1479
P7- 5 Battery Cover AZN7919 AZA7424
P7- 8 Power Cord ADG1214 Not used
P7-10 User Card A ARY1139 Not used
P7-11 User Card B ARY1140 Not used
P7-20 Carton AHD3171 AHD3172
P7-24 Vinyl Bag AHG1340 AHG1310
P7-28 User Card C ARY1142 Not used
EXTERIOR SECTION
P9-17 Flexible Cable (J208) ADD1226 Not used
P9-18 Flexible Cable (J205) ADD1243 ADD1212
P9-24 6P Housing Wire (J111) ADX2852 Not used
P9-29 Front Chassis ANB1864 ANB1862
P9-30 Terminal Panel ANC2353 ANC2354
P9-33 SR Holder ANG2581 ANG2567
P9-40 Front Shield C ANG2640 ANG2641
P9-55 FFC Cushion AEB1395 Not used
P9-62 Scart Shield S ANG2636 Not used
P9-63 Scart Shield W ANG2643 Not used
1. CONTRAST OF MISCELLANEOUS PARTS
For the applying amount of lubricants or glue, follow the instructions in this manual.
(In the case of no amount instructions, apply as you think it appropriate.)
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Screws adjacent to mark on product are used for disassembly.
Reference Nos. indicate the pages and Nos. in the service manual for the base model.
NOTES:
•
When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
560 Ω→56 × 10
1
→ 561 ........................................................ RD1/4PU
5
6
1
J
47k Ω→47 × 10
3
→ 473 ........................................................ RD1/4PU
4
7
3
J
0.5 Ω→R50 ..................................................................................... RN2H
R
5
0
K
1 Ω→1R0 ..................................................................................... RS1P
1
R
0
K
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
5.62k Ω→ 562 × 10
1
→ 5621 ...................................................... RN1/4PC
5
6
2
1
F
CONTRAST TABLE
PDP-R04G/TLDFR and PDP-R04E/WYVI6 are constructed the same except for the following :
To Next Page
Loading...
