Pioneer PDP-R04G - Disassembly Procedures; Disassembly: Metal Bonnet Top and Bottom Covers; Disassembly: Front Panel Section Removal

PDP-R04E
140
1234
1234
C
D
F
A
B
E
7.1.2 DISASSEMBLY
1
Remove the metal bonnet top by removing the six screws.
Caution :
Please remove it after pulling it in a rear direction because
metal bonnet top and bottom are hard to reduce.
2
Remove the metal bonnet bottom by removing the five
screws.
3
Remove the six hooks.
4
Remove the front panel section.
5
Remove the AC SW Assy by removing the two screws.
Metal bonnet top
Metal bonnet top
Metal bonnet bottom
Metal bonnet bottom
Front panel section
Front panel section
1
2
2
1
1
1
1
1
Metal bonnet top and bottom
1
1
Remove the four screws.
2
Disconnect the one connector.
Front panel section
2
2
2
2
Rear view
Top view
Bottom view
AC SW Assy
H
1
1
3
3
5
5
3 3
3 3
2
1
1
1
2