What to do if no sound is heard from Pioneer Stereo Receiver?
If you are not hearing any sounds from your Pioneer Stereo Receiver and the volume level won't increase, make sure the cables are connected correctly. Also, check that the volume isn't turned all the way down and increase it. Finally, ensure that the front, rear, left, and right speakers are properly adjusted in level balance.
Why is sound not heard over a specific speaker on my Pioneer Stereo Receiver?
If you're not hearing sound over a specific speaker with your Pioneer Stereo Receiver, the speaker’s Size might be set to OFF. Make the correct Size setting for the speaker. Also, the speaker’s Level might be set too low. Increase the speaker’s Level setting to get the balance right with the other speakers. Finally, if you don't have a center speaker installed, but the center speaker’s Size is set to SMALL or LARGE, set the center speaker’s Size to OFF.
Why is bass content not heard on my Pioneer Stereo Receiver?
If you're not hearing bass content from your Pioneer Stereo Receiver, the subwoofer may be set to OFF while other speakers are set to OFF or SMALL in Size. Make the correct settings. If no subwoofer is installed, the front or rear speaker needs to be set to LARGE.
Why does my Pioneer Super Tuner III D AVM-P9000 Stereo Receiver occasionally output no sound when Dolby Pro Logic is on?
If occasionally no sounds are output when Dolby Pro Logic is switched on with your Pioneer Stereo Receiver, and the center speaker setting is at SMALL or LARGE whereas no center speaker is installed, change the center speaker’s Size setting to OFF. Note that if the audio source is mono and Dolby Pro Logic is switched on, sound is heard over the center speaker only.
Why does my Pioneer Super Tuner III D AVM-P9000 Stereo Receiver occasionally output no sound over other speakers than the center one?
If occasionally no sounds are heard over other speakers than the center one on your Pioneer Stereo Receiver, Dolby Pro Logic may be switched on. Set Dolby Pro Logic to OFF. Note that if the audio source is mono and Dolby Pro Logic is switched on, sound is heard over the center speaker only.
Why do no sounds come from the DVD player only on Pioneer Stereo Receiver?
If no sounds are coming from the DVD player only through your Pioneer Stereo Receiver, the optical cable may have become detached. Connect the cable correctly. Also, the DVD player might not be properly set for output. Make the correct output setting.
How to fix a Pioneer Super Tuner III D AVM-P9000 Stereo Receiver if the power switch doesn't work?
If the power switch on your Pioneer Stereo Receiver isn't working and no functions are coming on, first ensure that all cables and connectors are correctly and firmly plugged in. If the issue persists, the fuse may be broken. Remove the cause of the blown fuse and replace it with a fuse of the same rating.
Why is my Pioneer Super Tuner III D AVM-P9000 Stereo Receiver remote control not working?
If the remote control for your Pioneer Stereo Receiver isn't working, the battery power might be running low. Replace the batteries.
What to do if no images come on Pioneer Stereo Receiver?
If you're not getting any images on your Pioneer Stereo Receiver, the parking brake cord may not be connected. Connect the parking brake cord and engage the parking brake. Also, make sure the parking brake is engaged.
Why are speakers not available to be adjusted on Pioneer Super Tuner III D AVM-P9000 Stereo Receiver?
If speakers are not available to be adjusted on your Pioneer Stereo Receiver, their Size settings might be at OFF. Make the correct Size settings.
General| Brand | Pioneer |
|---|---|
| Model | Super Tuner III D AVM-P9000 |
| Category | Stereo Receiver |
| Language | English |
Explains the remote control's buttons and battery installation.
Covers safe driving warnings, microprocessor reset, and general precautions.
Adjusting cabin EQ, speaker settings, sound field, source levels, and audio modes.
Detailed setup for speakers, including output levels, crossover, and phase.
Fine-tuning cabin EQ, parametric EQ, speaker levels, time alignment, and curves.
Common issues and remedies for general, audio, and DSP system problems.
Detailed instructions for connecting the unit's power cord.
How to connect the unit to a separate power amplifier using RCA jacks.
Connecting the unit to a car stereo without RCA output jacks via speaker input.
Diagram and instructions for connecting system components as per diagram (A).
Diagram and instructions for connecting system components as per diagram (B).
Connecting external video components to the unit and watching on a rear display.
To Next Page
