Why is Time Alignment not available on Pioneer Super Tuner III D AVM-P9000?
If Time Alignment is not available on your Pioneer Stereo Receiver, the Listening Position might not be set correctly. Set Listening Position correctly. Also, Their Size settings might be at OFF. Make the correct Size settings.
Why can't I switch the phase of the subwoofer on my Pioneer Stereo Receiver?
If the subwoofer is not available to switch its phase on your Pioneer Stereo Receiver, it might be set to OFF. Set the subwoofer to the ON position.
Why does switching Dynamic Range Control ON have no effects on Pioneer Super Tuner III D AVM-P9000 Stereo Receiver?
If switching Dynamic Range Control ON has no effect on your Pioneer Stereo Receiver, it's likely because the currently reproduced sound is not Dolby Digital coded. This feature is only effective on Dolby Digital sounds.
General| Brand | Pioneer |
|---|---|
| Model | Super Tuner III D AVM-P9000 |
| Category | Stereo Receiver |
| Language | English |
Explains the remote control's buttons and battery installation.
Covers safe driving warnings, microprocessor reset, and general precautions.
Adjusting cabin EQ, speaker settings, sound field, source levels, and audio modes.
Detailed setup for speakers, including output levels, crossover, and phase.
Fine-tuning cabin EQ, parametric EQ, speaker levels, time alignment, and curves.
Common issues and remedies for general, audio, and DSP system problems.
Detailed instructions for connecting the unit's power cord.
How to connect the unit to a separate power amplifier using RCA jacks.
Connecting the unit to a car stereo without RCA output jacks via speaker input.
Diagram and instructions for connecting system components as per diagram (A).
Diagram and instructions for connecting system components as per diagram (B).
Connecting external video components to the unit and watching on a rear display.
To Next Page
