Section One: ASSEMBLY INSTRUCTIONS
ATTACHING THE SIDE SHELF HANDLE
Installation Steps
Part Needed:
Hardware Required:
Using your wrench secure all four screws (A)
throug
h the handle (13) and insulated fe
lt
spa
cers, onto
the barrel.
Ensure a tight fit, without over tightening.
#13 Tray
Holder— 820Deluxe
Stainless
2 Insulated Felt Spacers
4
ATTACHING THE GREASE BUCKET
COOKING GRIDS (2)
Your Pit Boss grill comes with Cast Iron cooking grids. Cast Iron is an excellent
heat absorber and is still the best way to produce those “steak house’ sear
markings.
Place this Porcelain Coated steel grid on to the two brackets
found on either end of the barrel
ATTACHING THE SERVING TRAY
IMPORTANT: DO NOT use the Chrome Side Shelf Handle to move or lift the unit.
Because of the size, it will break. This is not a warranty item.
Screw 1/4”- 20* 3/5” x 4 (AA)
NOTE: To maintain the searing and grilling performance of your cooking
grids, as well as their longevity, some special care and maintenance Is
required as with any cast iron cooking tools.
Page 10
UPPER COOKING RACK (1)
PLACING THE COOKING COMPONENTS
To Next Page
Loading...
