Pit Boss PB757GD - Mounting the Control Knobs; Placing the Grease Cup; Expanding the Side Shelves; Set-Up for Gas Cylinder

8
9.    
Installation:
• Drop the upper gas cylinder hook into the correct position for usage.
Note steps as shown in illustration 9A.
• Unfold the lower gas cylinder bracket into the correct position for
usage. Note steps as shown in illustration 9B.
• The unit is now completely assembled.
8.    
Installation:
• Unlock the front latch. Unfold the side shelves to expose the hot plate
for usage.
6.    
Parts Required:
4 x Control Knob (#4)
Installation:
• Mount each Control Knob to the front panel of the unit.
7.    
Parts Required:
1 x Grease Cup (#3)
Installation:
• On the front of the unit, place the Grease Cup into the Grease Cup
housing, as shown in the illustration.
7
6
9
9
8
4
4
4
4
3