www.pivotcycles.com info@pivotcycles.com 1.877.857.4868
12
THIRD PARTY COMPATIBILITY
Compatible Devices
NOTE: A third party device is normally compatible if it includes a BLE interface (Bluetooth 4.0 or higher). The list of
connectable dvices includes the following:
Garmin: Edge 530, Edge 830, Edge 1030, Fenix 5 Plus Series, Fenix 6, Forerunner 945, MARQ
Wahoo: ELEMNT ROAM, ELEMNT BOLT
Sigma: iD.TRI, iD.FREE
Lezyne: Mega XL, Super Pro
Garmin Pairing
NOTE: A user's Garmin can be paired to the E-Vault to display cadence or power.
1. On the Garmin, select the three horizontal bars at the lower right of the screen to access the main menu.
2. Select "Sensors".
3. Select either "Cadence" or "Power". The Fazua system can provide one or the other, but not both
simulataneously.
4. Select "Add Sensor".
5. The Garmin will begin searching for the E-Vault. Turn on the E-Vault by pressing the center Fazua botton
on the controller. The lights will ash blue three times.
6. The Garmin will nd power or cadence/speed depending on what was selected. Select "Add".
7. The customer can now choose to add a new data screen to support the newly added sensor.
To Next Page
Loading...