18 - ATR224 - DRR224 - User manual
10 Access configuration
Press Display Do
1
FNC
for 3 sec.
Display 1 shows PASS,, while display 2
shows
0000 with the 1st digit flashing.
2
Modify flashing digit and move to next
digit with SET.
Enter password
1234.
3
FNC
to confirm
Display 1 shows the first parameters
group, display 2 shows the description.
4
or
Scroll parameters groups.
5
SET
to confirm
Display 1 shows the first parameter of
the group and display 2 shows its value.
Press FNC to exit configuration.
6
or
Scroll parameters.
7
SET
to confirm
Allows parameter modification (display
2 flashes)
8
or
Increases or decreases
visualized value
cd
Introduce new data
9
SET
Confirms and stores the new value.
If the value is different from default
values, the arrow keys light on.
10
FNC
Backs to parameter groups selection
(see point 3).
Press again FNC to exit configuration
10.1 Parameters list functioning
The controller integrates many features that make the configuration parameters list very long. To make
it more functional, the parameters list is dynamics and it changes as the user enables / disables the
functions. Practically, using a specific function that occupies a given input (or output), the parameters
referred to other functions of that resource are hidden to the user making the parameters list more
concise.
To simplify the reading/interpretation of the parameters, pressing SET it is possible to visualize a brief
description of the selected parameter.
Finally, keeping pressed FNC, it is possible to move from the mnemonic visualization of the parameter
to the numeric one, and vice versa. Ex. The first parameter can be displayed as
S E n .1 (mnemonic
visualization) or as
P. 0 01 (numeric visualization).
Set the product parameters so that they are suitable for the system to be controlled. If they are not
suitable, unexpected operations may occasionally cause materials damage or accidents.
To Next Page
Loading...
Need help?
General
