Pixsys ATR241-BC User Manual

24
10. Error messages
In case the plant does not work properly, the controller stops the
program running and shows a fault condition.
Example: the controller will notify a broken thermocouple
visualizing
flashing on display.
# Cause Do
Programming error
E
²
PROM.
-
Cold junction sensor failure
or ambient temperature out
of range
-
Wrong configuration data.
Possible lost of calibration
values
Check configuration
parameters.
Open sensor or
temperature out of range.
Check connection of sensor

Pixsys ATR241-BC Specifications

General

Brand	Pixsys
Model	ATR241-BC
Category	Controller
Language	English