Z-Meter DX4091/ User Guide PL Engineering Ltd
ver. 1.02 (2022) page 35 of 44
Enter dimensions in millimeters, fields are separated by ";".
For thermocouples with a round section, the first field (A) is the
diameter, the second field (B) must be "0" (zero).
Start Measurement
Press the «Measure» button.
Measurement progress
The measurement lasts, on average, about 1 minute, during which
the measurement progress is reflected on the built-in graph of the
measured voltage and in the fields of intermediate results.
And also indication in Status Line.
To Next Page
Loading...