PL Engineering Ltd Z-Meter DX4091/ User Guide
page 36 of 44 ver.1.02 (2022)
End of measurements
At the end of measurements in the Main Window of the program all
measured values are displayed:
- conductivity type (Polarity),
- specific conductivity (Sigma)
- electric resistance of the sample (Resistance),
- Figure-of-Merit,
- time constant,
- calculated value of the cooling capacity of the module
(maximum
ΔT), which can be made of such thermoelements.
Measurement results storage
The results are automatically stored in the measurement protocol,
which can be viewed by the «History» button.
To Next Page
Loading...