8
DISC / USB OPERATION
To insert DISC / USB
To play files on a disc, insert a disc with the label surface facing upward into the disc slot.
Playback will begin automatically.
To play files in a USB device, open the USB port cover, then insert a USB storage device into
the USB port. Playback will begin automatically.
Label surface up
Eject Disc/USB
Play/Pause
Next/Previous Track
Fast Forward/Backward
Introduction Scan
INT
Repeating the same track
Playing all tracks in random
RDM
Track/Folder Navigation
5/-10/FLR-
6/+10/FLR+
5/-10/FLR-
6/+10/FLR+
To eje c
t a disc, press the (eject) button to eject the disc and then remove it.
To eject a USB device, remove the USB device.
Press the (play/pause) button to pause or resume playback.
To
play the next track, press the button.
To play the previous track, press the button.
To fast forward, press and hold the button.
To fast backward, press and hold the button.
Press the button to play the first 10 seconds of each track, press again to stop the
introduction scan, and play the current track.
Press the RPT button to toggle between RPT ONE (Continuously repeats current track), RPT DIR
Press the button to p
layalltracksinrandomorder,pressagaintocancelthisfunction.
During a disc, USB mode, press the button to go backward 10 tracks.
Press the button to jump forward 10 tracks.
During a MP3 disc, USB mode, press and hold the button to go back the previous
folder. Press and hold the button to go to the next folder.
You can repeat this function depending on the number and level of folders.
These buttons have no this function if the USB device has no folders.
(Continuouslyrepeats all tracks in current folder), RPT ALL (Play all track) and RPT OFF.
To Next Page
Loading...
