User Manual of IAP-1800AX & IAP-2400AX
- 77 -
Type
There are two types: Host and Net.
When the Net type is selected, user does not need to input the
Gateway.
Destination
The network or host IP address desired to access.
Netmask
The subnet mask of destination IP.
Default Gateway
The gateway is the Industrial 802.11ax Wireless AP or host’s IP
address to which packet was sent. It must be the same network
segment with the WAN or LAN port.
Interface
Select the interface that the IP packet must use to transmit out of the
Industrial 802.11ax Wireless AP when this route is used.
Comment
Enter any words for recognition.