User Manual of IAP-1800AX & IAP-2400AX
- 91 -
Destination IP Address
Input the IP address of web site which you want to block.
Anywhere (of destination
IP Address)
Check the box if you want to control all web sites, meaning the LAN
user can’t visit any web site.
Destination Port
Input the port of destination IP Address which you want to block.
Leave it as blank if you want to block all ports of the web site.
Protocol
Select the protocol type (TCP, UDP or all).
If you are unsure, please leave it to the default all protocol.
To Next Page
Loading...
Need help?
General
