Planet IGS-6325-4UP2X - Storing The Current Switch Configuration

11
IPAddress:192.168.1.100
Subnet Mask: 255.255.255.0
Figure 4-3: Conguring IP Address Screen
4.Enter“exit” commandtwicetoreturntotheglobalcongurationmode.
5. Repeat step 1 to check if the IP address has changed.
4.3 Storingthecurrentswitchconguration
1.Atthe“#” prompt, enter the following command and press <Enter>.
# copy running-cong startup-cong
Figure 4-4: Saving Current Conguration Command Screen
If the IP is successfully congured, the Industrial Managed Switch will apply
the new IP address setting immediately. You can access the Web interface of
the Industrial Managed Switch through the new IP address.
If you are not familiar with the console command or the related
parameter, enter “help” anytime in console to get the help
description.