Planet IGS-6325-4UP2X - Restoring Default Configuration

17
6.RestoringDefaultConguration
 IP address has been changed or admin password has been forgotten –
To reset the IP address to the default IP address “192.168.0.100” and the
user password to factory default (default password is admin), press the
recessed reset button on the front panel for about 10 seconds. After the
device reboots, you can log in the management Web interface within the
same subnet of 192.168.0.xxx with default password. Please note that all the
previous settings will disappear after resetting the switch to factory default.
P2
R.O.
P1
Ring
Alarm
I/O
IGS-6325-5X1T
Console
115200,N,8,1
10GBASE-T
Reset
5
6
4
3
2
1
5
4
3
2
1
2.5G
10G/1G
5G/100
LNK
LNK
LNK
2.5G
10G/1G
LNK/ACT
LNK/ACT
Reset Button
Figure 6-1: IGS-6325-5X1T Reset Button