7
4. Web Login
4.1 Starting Web Management
The following shows how to start up the Web Management of the Industrial
Managed Switch. Note the Industrial Managed Switch is congured through an
Ethernet connection. Please make sure the manager PC must be set to the
same IP subnet address.
For example, the default IP address of the Industrial Managed Switch is
192.168.0.100, then the manager PC should be set to 192.168.0.x (where x
is a number between 1 and 254, except 100), and the default subnet mask is
255.255.255.0.
RJ45/UTP Cable
192.168.0.x
IP Address:192.168.0.100
IGS Industrial Managed Switch
Figure 4-1: IP Management Diagram
4.2 Logging in to the Managed Switch
1. Use Chrome 98.0.xxx or above for Web browser and enter IP address
https://192.168.0.100 (the factory default IP address) to access the Web
interface.
2. When the following dialog box appears, please enter the default user name
admin and password. Refer to the following section to determine your initial
login password.
Default IP Address: 192.168.0.100
Default User Name: admin
Default Password: sw + the last 6 characters of the MAC ID in lowercase
To Next Page
Loading...
Need help?
General
