Planet IGSW-24040T - Recovering Back To Default Configuration

15
6.RecoveringBacktoDefaultConguration
 IP address has been changed or admin password has been forgotten –
To reset the IP address to the default IP address “192.168.0.100” or reset the
login password to default value, press the hardware-based reset button on the
rear panel for about 10 seconds. After the device is rebooted, you can log in the
managementWebinterfacewithinthesamesubnetof192.168.0.xx.
115200, N, 8, 1115200, N, 8, 1
IGSW-24040T
ResetReset
ConsoleConsole
24242222
2424
2323
2222
2121
2222 2424
2121 2323
10/100 LNK10/100 LNK
1000 LNK1000 LNK ACTACT
ACTACT
Reset Button
Figure 6-1: IGSW-24040T Reset Button