15
5. Hardware Installation
There are three ways to switch PC. Please see below the operation instructions
for more understanding.
Manual Key
You just need to press the Port Select Button on the front panel of the KVM.
The Selection LED (Green) is on, indicating that you are switching to the
corresponding port.
The Port Select Button functions only when connected to a PC.
Switch Hotkey
You can select the QVS (Quick View Setting) from the OSD of the PC rst
(for a quick switch of PC) and use the keyboard to switch to the previous or
next set of PC.
Scroll + Scroll + Num (Default setting)
Ctrl + Ctrl + Num
Alt + Alt + Num
Shift + Shift + Num
Example: Press Scroll + Scroll + 02 and switch to PC port 2.
OSD (On Screen Display) Activating Key
To Next Page
Loading...
Need help?
General