How to use NFS:
1. Enable the NFS server function in “service-ÆLinux file service “on web.
2. On Linux OS, open terminal and change into root account as below
[steve@localhost ~]$ su
password：
3 .In Terminal, show the NAS server’s directory as below commands:
[root@localhost steve]#showmount -e xxx.xxx.xxx (NAS’s IP address)
Export list for xxxx.xxx.xxx.xxx:/data/HardDisk1/Volume1 *
4. In Terminal, restart the NFS server as below command:
[root@localhost steve]# service nfs restart
Shutting down NFS mountd: [ OK ]
Shutting down NFS daemon: [ OK ]
Shutting down NFS quotas: [ OK ]
Shutting down NFS services: [FAILED]
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
Starting NFS services: [ OK ]
Starting NFS quotas: [ OK ]
Starting NFS daemon: [ OK ]
Starting NFS mountd: [ OK ]
5. In Terminal, mount the NAS directory to Linux OS as below command:
[root@localhost steve]# mount -t nfs 192.168.7.186:/data/HardDisk1/Volume1/Share /mnt -o nolock
At last you can check that the NAS directories have been displayed in filesystem-(mnt on your Linux computer,
and you can do operation as it is in local.
To Next Page
