16-Channel Network Video Recorder
NVR-1615
31
5.4. System Setting
5.4.1 Device Information
The “Device Information” provides the general information of the device such as firmware
version and model name.
Model Name: Display model name.
Device Title: Key-in device title here.
Software Version: Display current firmware version
5.4.2 Date & Time Info
Current Time: Display current time.
Server Date & Time: Display current system date-time.
Adjust:
Manual:
Click setting to approach date-time setting dialog and select current date and time now;
click “OK” to change system time or click “Cancel” button to abort configuration.
Synchronize with NTP (default):
Enable synchronize date-time with NTP service.
NTP Server: Key-in NTP server IP or domain name. If you use the domain name to connect
NTP server, the DNS service must be enabled.
NTP Sync Interval: Select time period to synchronize with NTP service.
Time Zone: Select the time zone of NVR location.
Daylight Saving: Enable or disable daylight saving mode.
Daylight Saving Start Time: Configure daylight saving start time; it works with daylight
saving mode when enabled.
Daylight Saving End Time: Configure daylight saving end time; it works with daylight
saving mode when enabled.
Daylight Saving Offset: Configure daylight saving offset time with current time; it works
with daylight saving mode when enabled.
Auto Login: Enable auto login mode to login with defined user name and password when
system boots up.
To Next Page
Loading...
Need help?
General