Planet SGSW-24040 - 4 Logon To The Console

6
4. Logon to the Console
Once the terminal has connected to the device, power on the WGSW / SGSW
ManagedSwitch,theterminalwilldisplaythatitisrunningtestingprocedures.
Then,thefollowingmessageaskstheloginpassword.Thefactorydefaultpassword
asfollowingandtheloginscreeninFigure4-1appears.
Password: admin
Figure 4-1 WGSW / SGSW Managed Switch Console Login screen
Note
1.Forsecurityreason,pleasechangeandmemorizethenewpass-
wordafterthisfirstsetup.
2. Only accept command in lowercase letter under console inter-
face.