41
Reset
In the event that the system stops responding correctly or in some way stops functioning, you can
perform a reset. Your settings will not be changed. To perform the reset, click on the “APPLY” button
below. You will be asked to confirm your decision. The reset will be complete when the power light
stops blinking
Status
The status page displays the status of the system, including the connection status of the interfaces,
firmware and hardware version numbers, system log and DHCP client information.
Internet Connection
The Internet Connection page displays the status of the Internet Connection, including the connection
status of the Internet interfaces, WAN port IP, Subnet Mask, Gateway IP and Primary and Secondary
DNS IP.
When WAN port setting is dynamic IP, user can use “Disconnect” and “Connect” to release and update
WAN port IP
.
To Next Page
Loading...
Need help?
General
