User Manual of WNAP-6315
-59-
Figure 5-39 Security Settings – WPA2 Enterprise
The page includes the following fields:
Object Description
Encryption
You can disable the encryption or select WEP, WPA2, and WPA-Mixed as the
encryption method to your wireless network.
Authentication Mode
Select “Enterprise (RADIUS)” for user authentication and you will require a
RADIUS authentication server to be configured on the wired network. Select
“Personal (Pre-Shared Key)” and you will require a pre-shared key to be
configured for client authentication.
Management Frame
Protection
Management frame protection (MFP) provides security for the otherwise
unprotected and unencrypted 802.11 management messages passed
between access points and clients. MFP provides both infrastructure and
client support. If you choose this to “Required”, then clients are allowed to
associate only if MFP is negotiated. If you choose “Capable”, then the
non-supporting clients are allows to associate (without using MFP).
WPA2 Cipher Suite
Selects the data encryption type to use. (Default is determined by the
Encryption Mode selected.)
TKIP — Uses Temporal Key Integrity Protocol (TKIP) keys for encryption.
WPA specifies TKIP as the data encryption method to replace WEP. TKIP
avoids the problems of WEP static keys by dynamically changing data
encryption keys.
To Next Page
Loading...
Need help?
General
