Chapter 2. INSTALLATION
2.1 Microsoft Windows Driver Installation
1. If you had ever installed other wireless adapters before, please uninstall the
existed drivers and utilities first.
2. The following installation is performed in Windows XP. The procedures in other
OS are similar.
Please follow the instructions below to install the USB Wireless Adapter:
Step 1. Insert the USB wireless network card into an empty USB 2.0 port of your computer when
computer is switched on. Never use force to insert the card, if you feel it’s stuck, flip the card
over and try again.
Step 2. The system will find the new hardware and display the below message. Click “Cancel” to
skip.
Step 3. Insert the bundled CD into the CD-ROM drive.
15
To Next Page
Loading...
