4.4.1 Push Button Config (PBC)
This is the easiest way to establish secure connection by WPS, but if there’re more than one
WPS ed access poin utton config, please use PIN / numeric code instead.
a. To PBC method, select “Push-Button Configuration(PBC)”. Click the right arrow to save
your
-support t using Push-B
use the
settings.
b. Click “Start PBC”. At the same time (within 120 seconds) click the WPS button on the device to
which you are connecting.
Please activate WPS function of wireless access point now, and the secure connection between
wireless adapter and the WPS-supported access point will be established automatically.
c. Once connected, your WPS profile appears in the Profile List screen.
44