If you select a key format of 'ASCII(5 or 1 haracters)' in the WEP Key field, type
a security key 5 or 13 characters long made up of digits '0'-'9' and letters 'a'-'z' and 'A'-'Z'.
Click “Advanced” button to setup advanced settings of software access point. If you don’t know the
meanin
g and affects of these settings, please keep them as default.
3 ASCII c
5.2 Advanced Settings
The setup items are listed below:
Object Description
No forwarding among
wireless clients
If selected, this disables the forwarding of packets by the AP or router
of packets sent by wireless clients to other wireless clients in the
same network.
Beacon Interval (ms)
Default = 100 ms. The interval between beacon frames.
Tx Power
100%. The power of the transmitted signal as a percentage of
maximum power. Options include 100%, 75%, 50%, 25%, and Low.
Idle time (60 - 3600) (s)
can be idle before it is disconnected from the network
Default = 300s. The maximum time a connected computer or device
.
Apply
Click Apply to save your changes.
54
To Next Page
Loading...
