150Mbps 802.11n Wireless USB Adapter
WNL-U554M
Step 4. If a password (Network Key) is required to access the wireless access point, please confirm
the Authentication and Encryption method first, and then key in the password in the “WPA
Preshared Key”.
Network security option (“Authentication” and “Encryption”) will be selected
automatically based on the security setting of the wireless access point you
selected. It’s not necessary to change these settings by your own self.
Step 5. Click “Right arrow” button, and you’ll see the connection has been added to the profile and
then you can connect to the wireless network successfully.
Step 6. Wireless adapter will attempt to connect to access point; this may require few seconds to
minutes. When the SSID and IP address are displayed in the main window, your computer is
connected to access point you selected. Click “Close” icon to close configuration window.
To Next Page
Loading...
Need help?
General
