Planet WPG-210N - Page 57

PLANET 802.11n Wireless Presentation Gateway
WPG-210N
Figure A-3
 Setting IP address manually
1 Select Use the following IP address radio button.
2 If the device's LAN IP address is 192.168.1.1, type in IP address 192.168.1.x (x is from 2 to 254), and
Subnet mask 255.255.255.0.
3 Type the device’s LAN IP address (the default IP is 192.168.1.1) into the Default gateway field.
4 Select Use the following DNS server addresses radio button. In the Preferred DNS Server field you
can type the DNS server IP address which has been provided by your ISP
57