Plextalk PTN2 - Setting the Date and Time; Selecting a Preferred Waiting Sound

22
4.3. Setting the date and time.
To set the date and time for the internal clock, do the following:
 Press the Menu key and select "System Settings" by using the
Number 4 or 6 key and then press the Enter key or Number 8
key to confirm.
 Select the "Set the date and time" option from the menu and
press the Enter key or Number 8 key.
 Use the Number Pad to enter the current year with 4 digits and
press Enter, or just press Enter to accept the current setting.
 Use the Number Pad to enter the current month with 2 digits
and then press Enter, or just press Enter to accept the current
setting.
 Use the Number Pad to enter the current day with 2 digits and
then press Enter, or just press the Enter key to accept the
current setting.
 Use the Number Pad to enter the current time with 4 digits and
press Enter. Use leading zeros where necessary.
 If you wish to select the AM or PM setting, before pressing the
Enter key, use the Rewind key or Fast Forward key to make
your selection.
 By way of confirmation, the date and time that you have just
entered will be spoken back to you.
Note: When entering incorrect number, press the Cancel key to clear
the input number.
4.4. Selecting a preferred waiting sound.
When the PLEXTALK is busy, such as when it is accessing a media,
it plays a sound to indicate that it is carrying out that action.
To select your preferred waiting sound, do the following:
 Press the Menu key once to access the Main Menu.