Plextalk PTN2 - Reset PLEXTALK to factory defaults

53
Some DAISY books have items that you are able to skip. PLEXTALK
enables you to select whether you skip the item or not. This feature
is called "Skippable." Skippable items are as follows:
 Page number
 Footnote
 Note reference
 Annotation
 Line number
 Sidebar
 Producer note
To set the "Skippable" settings, do the following:
 Press the Menu key once to access the Main Menu.
 Use the Number 4 or 6 key to go to the "Skippable" option and
select it by pressing the Enter key.
 Use the Number 2 or 8 key to select Skippable item and use
the Number 4 or 6 key to select "Skip" or "Play."
 After deciding all the Skippable items to be skipped or not,
press the Enter key.
13.4. Reset PLEXTALK to factory defaults.
To reset all settings back to the factory defaults, do the following:
 Press the Menu key once to access the Main Menu.
 Use the Number 4 or 6 key to go to the "System settings"
option and select it by pressing the Enter key.
 Use the Number 4 or 6 key to go to the "Initialize all settings to
default" option and select it by pressing the Enter key.
 PLEXTALK will ask you to confirm that you wish to proceed.
Press the Enter key to set all settings to factory defaults or the
Cancel key to abort. After a short while, PLEXTALK will
restart.
The following is a list of all the default settings for the PLEXTALK.