EasyManua.ls Logo

Plextalk PTN2 - Changing the playback volume

Default Icon
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
To fast forward, press and hold down the Fast Forward key.
Playback will start when you release the key.
When you play a DAISY book with audio or Audio file, as you hold
down the Rewind or Fast Forward key, the fast rewind or fast forward
will skip 1 minute, 5 minutes, 10 minutes, 20 minutes and so on. If
the key is released before the "10 minutes" option is spoken,
playback will start at the place the key is released. If the key is
released after this point, the fast rewind or fast forward will continue
until the Play/Stop key is pressed to stop the process. Playback will
then start automatically.
6.3. Changing the playback volume.
The volume can be set on a scale from 0 to 25, in steps of 1, with 0
being silent and 25 being the highest possible setting.
To increase the playback volume, either press the Volume up
key repeatedly, increasing the level by 1 setting each time, or
press and hold down the Volume up key until the volume
reaches the desired level.
To decrease the playback volume, either press the Volume
down key repeatedly, decreasing the level by 1 setting each
time, or press and hold down the Volume down key until the
volume reaches the desired level.
Pressing the Volume up key and down key together will lead to
middle volume position, volume 13.
6.4. Changing the guide volume.
The volume of the guide speech can either be adjusted in conjunction
with the playback volume or it can be adjusted independently.
To set the guide volume independently, do the following:
Press the Menu key once to access the Main Menu.

Table of Contents

Related product manuals