Plextalk PTN2 - Sleep Timer Function

25
5.4. Sleep timer function.
The Sleep Timer feature enables you to specify an amount of time,
after which, PLEXTALK will shut down.
5.4.1. Setting the sleep timer.
To set the sleep timer, do the following:
 Press the Sleep Timer key once. PLEXTALK will say, "Sleep
timer. 15 minutes. Set."
 Press the Sleep Timer key again to increase the time for
shutting down. The Sleep Timer setting will increase by 15
minutes for each press, up to a maximum of 1 hour. Repeat
pressing the Sleep Timer key until you reach the desired
setting.
Note: When you press the Sleep Timer key again, the PLEXTALK
may announce the remaining time for shutting down. In this case,
press the Sleep Timer key again while the PLEXTALK is announcing,
and the Sleep Timer setting will increase.
5.4.2. Cancelling the sleep timer.
To cancel the sleep timer, do the following:
 Press the Sleep Timer key. PLEXTALK will tell you that the
sleep timer is currently on and the number of minutes
remaining before shut down.
 Keep pressing the Sleep Timer key repeatedly until
PLEXTALK says "Off".