Plextalk PTN2 - Errors during backup

62
Guide voice: "Unsupported SD card" or "Unsupported USB device."
Possible cause: The SD card or USB media has been formatted with
an unsupported file system.
Solution: Insert an SD card which is formatted as FAT-16 or FAT-32.
Guide voice: Read error.
Possible cause: Title cannot be played back.
Solution: Press the Previous Title key or Next Title key to try to select
a different title, or switch the media including a different title.
Errors during backup.
Guide voice: "There is no target media".
Possible cause: You have not inserted a suitable backup media.
Solution: Insert either an SD card or a USB media with sufficient
storage space to perform the backup and then try again.
Guide voice: "The SD card is locked".
Possible cause: You have locked the SD card using the lock switch
on the side of the card.
Solution: Eject the card, move the locking switch to the unlocked
position, reinsert it into PLEXTALK and try again.